Product ID:E6011 CELLULOSE TY COAT ELECTRODE FOR SHIELD METAL ARC WELD
MSDS Date:02/14/1996
FSC:3439
NIIN:00-262-2652
MSDS Number: CCHSH

R & D METALS & CHEMICALS INC

201C PERIMETER PARK
KNOXVILLE, TX 37922
US

Emergency Phone: 423-531-6065

Info Phone: 423-531-6065

Cage: 56406

R & D METALS & CHEMICALS, INC

22533 KNOXVILLE, TN 37922-2233 US

Telephone: 423-531-2044

Cage: 56406

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1-2%

OSHA PEL C, 5 MG/M3 (FUME)

ACGIH TLV: 0.2 MG/M3; 9596

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 1-2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: BAL

SODIUM SILICATE, BINDERS

CAS: 1344-09-8

Fraction By Weight: 1-5%

KAOLIN; (MINERAL SILICATES)

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 0-1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9596

LD50 LC50 Mixture:TLV-TWA WELD FUME:5MG/M3.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FUME/GAS CAN BE DANGEROUS TO
HEALTH.SHIELD GAS(ARGON,HE,CO2)ARE
ASPHYXIANTS.ACUTE:DISCOMFT(DIZZ,NAU,DRYNESS/IRRIT
NOSE/THROAT/EYES).MN FUME MAY CAUSE HO LIKE SYMPTOM(METAL FUME
FEVER).CHRONIC:SIDEROSI S(FE DEPOSITS IN LUNG)AFFECT PULM
FUNCTION.ARC RAYS INJURE EYE/BURN SKIN.ELECTRIC SHOCK CAN
KILL.NOISE CAN(SIGNS/SYMPTO)
Effects of Overexposure:DMG EARS.LONG TERM OVEREXPO TO MN CMPDS MAY
AFFECT CNS.SYMPTOMS INCLUDE:MUSCUALR WEAKNESS,TREMORS SIMILAR TO
PARKINSON'S DISEASE.BEHAVIOUR CHANGES & CHANGES IN HADNWRITING MAY
ALSO APPEAR.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
BY AMERCIAN RED CROSS.

Flash Point:NOT FLAMMABLE
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER. HMIS:USE EXT MEDIA
RECOMMENDED FOR BURNING MATLS/FIRE SITUATION.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NON-FLAMMABLE. WELDING ARC & SPARKS CAN
IGNITE COMBUSTIBLES. REFER TO AMERICAN NATL STD Z49.1 FOR FIRE
PREVENTION DURING WELDING.

Handling and Storage Precautions:READ/UNDERSTAND MFG INSTRUCT/PRECAUT
LABEL.FILTER LENSES:RULE OF THUMB:START W/SHADE TOO DARK TO SEE
WELD ZONE,THEN GO TO NEXT LIGHTER GIVES SUFF VIEW
Other Precautions:RECOMMENDED WAY TO DETERMINE FUME/GAS COMP/QUANT
WORKERS EXPO:TAKE AIR SMPL INSIDE WELDER HELMET/WORKER BREATH
ZONE.ANSI/AWS F1.1 AVAILABLE FROM AMER WELD SOC,POB 351040,MIA,FL
33135.SEE AMER NAT STD Z-49.1 & OSHA 29CFR 1910.MONITOR CR VI.

Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESP WHEN WELDING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR
VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VNETI,LOC EXHASUT @ARC OR BOTH TO KEEP
FUMES/GASES BELO TLV IN WORKER BREATH ZONE/GENERAL AREA.
Protective Gloves:WELDER GLOVES.
Eye Protection:FCSHIELD W/FILT LENSES(SEE HNDLG PRCAUT)
Other Protective Equipment:HELMET;SCREENS/FLASH GOGG IF NECESSARY TO
SHIELD OTHERS.HEAD/HAND/BODY PROT FROM RADIATION/SPARK/ELECTR
SHOCK.
Work Hygienic Practices:TRAIN WELDER TO KEEP HEAD OUT OF FUMES/NOT
TOUCH LIVE ELCTRICAL PARTS/INSULATED HIMSELF FROM WORK/GROUND.
Supplemental Safety and Health
HAZ DECOMP PROD:USED.ALSO COAT ON METAL BEING WELDED,#OF
WELDER/VOL,QUAL/AMT OF VENTI,POSITION OF WELDER HEAD W/FUME
PLUME,PRESENCE OF ATM CONTAMIN.DECOMP PROD:ORIGINATING FROM
VOLATIZ/RX/OXIDAT OF MA TL+BASE METAL,COAT,ETC.PRESENT AS COMPLEX
CMPDS-NOT METALS.REASONABLITY:OXIDES OF INGREDS,CO,CO2,OZONE,NOX.

HCC:N1
Boiling Pt:B.P. Text:NP
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:NP
Vapor Density:NP
Spec Gravity:NP
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:NP
Appearance and Odor:FLUX COATED ROD.
Percent Volatiles by Volume:NP
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELD FUME/GAS CAN'T BE CLASSIFIED
SIMPLY.COMPO/QUANT DEPENDENT UPON METAL BEING WELD/PROCEDURES
FOLLOWED/ELECTRODE(SUPP)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMIN SURROUNDING
ENVIRO.DISCARD ANY PROD/RESIDUE/DISPOSABLE CNTNR/LINER IN
ENVIRONMENTALLY ACCEPTABLE MANNER IN FULL COMPLIANCE
W/FED/STATE/LOC REGS.CONTAIN TOX CHEM SUBJ TO REP ORT REQMT OF SARA
SEC 313/40CFR372:MANGANESE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.